Our arches are based on a so-called parametric model. This means that the basic design is fixed, while still allowing us to adjust dimensions to meet the requirements of a specific boat. Below are some of the parameters we adjust to meet the requirements of a specific boat and wishes of the boat's owner:

  • The width of the arch (1,5 m - 4,5 m)    Suitable for most sailboats between 25 and 55 feet

  • The height of the arch (1,2 m - 2,5 m)

  • Forward legs offset, meaning how much you want the forward legs out to the sides, relative to the aft legs

  • Height of horizontal cross-tubes

  • Length of and distance between davits

Watch our instructional video

Product specs

Tubes

Polished corrosion reistant stainless steel, AISI 316, 40 mm diameter, 2 mm material thickness

Feet

Polished corrosion resistant stainless steel, AISI 316, circular, 10 mm thickness, 100 mm diameter, three bolt holes.

Hollow, which allows for cabling inside tubes and all the way down through the deck

Backing plates

Corrosion resistant stainless steel, AISI 316, circular, 100 mm diameter, three bolt holes to match holes in the feet

For further specifications, contact us here.

Seen from port side front
Seen from port side front

Stainless steel, polished, 40 mm diameter tubes, 2 mm thickness

Seen from front
Seen from front

Foot, 100 mm diameter, 10 mm thick
Foot, 100 mm diameter, 10 mm thick

Three holes for bolts through deck. Large hole in the center for cables

Seen from port side front
Seen from port side front

Stainless steel, polished, 40 mm diameter tubes, 2 mm thickness

1/5

4,700 EUR  incl. VAT

Everything needed for installation

Full support during installation process